content is empty!
Tempered glass
5mm 8mm 12mm 6mm 10mm thick tempered glass is a heat toughened safety glass. It has undergone a special heat treatment to increase its strength and resistance to impact. In fact,5mm 8mm 12mm thick 6mm 10mm tempered glass is approximately five times more resistant than normal glass. As an example, a piece of 8mm tempered glass will be able to withstand a steel ball weighing 500g dropped from a height of 2 meters.
Features:
1. 5 times harder than ordinary float tempered glass, stronger resistance to thermal breakage than annealed or heat strengthened tempered glass.
2. Once breakage occurs, the glass disintegrates into small cubical fragments, which are relatively harmless to human body.
3. It withstands abrupt temperature change of 220 Centigrade.
4. Sizes are produced as per customer request. Once tempered, it can not be cut down.
Specifications
Product name | Tempered glass |
Edge of laminate glass | Rough Edge,Finish Edge,Polish Edge |
Size | Min. Size:300mm*300mm Max. size:2440mm*13000mm |
Thickness: | Glass:3mm,4mm,5mm,6mm,8mm,10mm,12mm,15mm,19mm |
Color | PVB Color: Clear, Milk, F. Green, Bronze, Light Grey, Dark Grey, Ocean Blue etc. Glass Color: Clear, Dark Bronze, Light Bronze, Dark Grey, Euro Grey, Mist Grey, Dark Green, F. Green, Dark Blue, Lake Blue etc. |
Application | Architectural door, window,ceiling, floor and curtain wall glass.exhibitions hall, Building glass. |
Delivery time | 10~15 days after received the deposit |
Production Range | LowE glass ,tempered glass, insulated glass, laminated glass, reflective glass etc. |
The fine grinding edge of glass is to undertake processing to the edge of glass, the all round smooth formation that makes glass, increase beautifu and safety.
Application:
FAQ:
Q1: How can you guarantee your final quality?
A1: As for quality control, we've approved four testing procedures: Initial inspection, re-inspection,
final inspection and sampling inspection. Each step will take photos and save for u all the time,
also support free warranty service.
Q2: How long is the production lead time?
A2: It depend on your quatity, normally is 30 days after deposit.
Q3: What kind of Certification did you pass?
A3: After relevant institution of professional evaluation, we're qualified for BS,GB,AS
ISO9001, etc. Also can supply local test report according to customer's
requirement when necessary.
Q4: How is the MOQ of required?
A4: We welcome any quantity under your requested. but a competitive price is always
depends on the quantity increase gradually.