content is empty!
PVB tempered laminated glass is made up of two or more panels tempered glass (toughened glass) permanently bonded together with clear or tinted PVB interlayer via a controlled, highly pressurized and industrial heating process.
e lamination process results in the glass panels holding together in the event of breakage, reducing the risk of harm.Tempered laminated glass is classified as grade A safety glass.
Safety PVB laminated glass characteristic:
High Security:because the interlayer film has strong tenacity and can absorb and weaken a mass of striking energy. Even if it's broken, the splinters will stick to the interlayer and not scatter.
Sound Insulation:PVB interlayer film is a kind of organic material and it can block sound waves. so laminated glass better sound insulation performance than the pure glass with the same thickness.
Anti-Ultraviolet:PVB film protects the furniture or appliances from discoloring and damage.
Energy-saving:The interlayer film impedes the transmission of solar heat and reduces cooling loads.
Toughened laminated glass manufacturer specification:
Max Size: | 3000*8000mm,custom size. |
| Single glass thickness: | 2mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm |
| Glass color: | clear, ultra clear, grey, green, blue, bronze |
| PVB thickness: | 0.38mm and multiple of 0.38mm PVB. |
| PVB color: | red, white, yellow, any pantone color. |
| Glass type: | annealed or toughened laminated glass in Clear, Tinted, Reflective, Low Iron, Etched, Mirrored, Textured, Colorsmart, Thermocolour, screen printing and Low E combinations. |
Max Size: 3000*8000mm
Single glass thickness: 2mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm
Glass color: clear, ultra clear, grey, green, blue, bronze.
PVB: 0.38mm and multiple of 0.38mm PVB.
PVB color: red, white, yellow, any pantone color.
Glass type: annealed or toughened laminated glass in Clear, Tinted, Reflective, Low Iron, Etched, Mirrored, Textured, Colorsmart, Thermocolour, screen printing and Low E combinations.
FAQ:
Q1: How can you guarantee your final quality?
A1: As for quality control, we've approved four testing procedures: Initial inspection, re-inspection,
final inspection and sampling inspection. Each step will take photos and save for u all the time,
also support free warranty service.
Q2: How long is the production lead time?
A2: It depend on your quatity, normally is 30 days after deposit.
Q3: What kind of Certification did you pass?
A3: After relevant institution of professional evaluation, we're qualified for BS,GB,AS
ISO9001, etc. Also can supply local test report according to customer's
requirement when necessary.
Q4: How is the MOQ of required?
A4: We welcome any quantity under your requested. but a competitive price is always
depends on the quantity increase gradually.